Effect of the nonlinearity of the CCD in Fourier transform profilometry on spectrum overlapping and measurement accuracy

In Fourier transform profilometry (FTP), we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device (CCD) and increase the measurement accuracy of the object shape. Firstly, the causes of producing higher-order spectrum components and inducing spectrum overlapping are analysed theoretically, and a simple physical explanation and analytical deduction are given. Secondly, aiming to suppress spectrum overlapping and improve measurement accuracy, the influence of spatial carrier frequency of projection grating on them is analysed. A method of increasing the spatial carrier frequency of projection grating to restrain or reduce the spectrum overlapping significantly is proposed. We then analyze the mechanism of how the spectrum overlapping is reduced. Finally, the simulation results and experimental measurements verify the correction of the proposed theory and method.     

Determining the resistance of X-pinch plasma

The current and the voltage of an X-pinch were measured. The inductance of the X-pinch was assumed to be a constant and estimated by the calculation of the magnetic field based on the well-known Biot-Savart's Law. The voltage of the inductance was calculated with L · di/dt and subtracted from the measured voltage of the X-pinch. Then, the resistance of the X-pinch was determined and the following results were obtained. At the start of the current flow the resistance of the exploding wires is several tens of Ohms, one order of magnitude, higher than the metallic resistance of the wires at room temperature, and then it falls quickly to about 1 , which reflects the physical processes occurring in the electrically exploding wires, i.e., a current transition from the highly resistive wire core to the highly conductive plasma. It was shown that the inductive contribution to the voltage of the X-pinch is less than the resistive contribution. For the wires we used, the wires' material and diameter have no strong influence on the resistance of the X-pinch, which may be explained by the fact that the current flows through the plasma rather than through the metallic wire itself. As a result, the current is almost equally divided between two parallel X-pinches even though the diameter and material of the wires used for these two X-pinches are significantly different.     

Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes (HWOLEDs) with the configuration of indium tin oxide (ITO)/ N, N, N, N-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD): tetrafluoro-tetracyanoqino dimethane (F4-TCNQ)/N,N-di(naphthalene-1-yl)-N,N-diphenyl-benzidine (NPB)/ 4,4-N,N-dicarbazolebiphenyl (CBP): iridium (III) diazine complexes (MPPZ) 2 Ir(acac)/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN): p-bis(p-N,N-di-phenyl-aminostyryl)benzene (DSA-ph)/bis(10-hydroxybenzo[h] quino-linato)beryllium complex (Bebq2)/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l'Eclairage (CIE) chromaticity coordinates are almost constant during a large voltage change of 6-12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.     

Stretch-Induced Shish-Kebabs in Rubbery Poly(L-Lactide)

The oriented crystallization in stretched rubbery poly(L-lactide) has been studied with the aid of in-situ rheo-Fourier transform infrared spectroscopy (FTIR) measurements and morphological observations. The oriented segments that survived after stretching are first transformed into shish structure composed of helical sequences via intra-chain conformational ordering and propagation, followed by the transverse growth of kebabs from the coiled chains in the surrounding matrix. Moreover, the formation of shish structure and kebabs shows different dependences on the stretching temperature as a result of different controlling molecular processes.     

Rheological Behaviors of Poly(Vinylidene Fluoride)/“Bud-Branched” Nanotubes Nanocomposites

Bud-branched nanotubes, fabricated by growing metal particles on the surfaces of multiwall carbon nanotubes (MWCNTs), were used to prepare poly(vinylidene fluoride) (PVDF)-based nanocomposites. The melt viscoelastic behaviors of PVDF and its nanocomposites were characterized. The results showed that the introduction of both the MWCNTs and bud-branched nanotubes (MWCNTs-B) increased the storage modulus, loss modulus, and complex viscosity of the nanocomposites. However, the bud-branched nanotubes were more efficient to increase the elasticity than the MWCNTs that have relatively smooth surfaces. In particular, it was observed that the bud-branched nanotubes caused an increase of normal force and crossover modulus, while for MWCNTs, no variation in the normal force and a decrease of the crossover modulus were observed.     

Preparation of Poly (L-lactic Acid) Microsphere

Poly (L-lactic acid) (PLLA) microspheres were prepared by a solvent evaporation method based on an oil/water emulsion. The effect of the mass ratio of PLLA and poly(vinyl alcohol) (PVA) on the formation of the microspheres was discussed, and the influence of extraction speed of dichloromethane on the microsphere morphology was also studied. Moreover, the influences of the PLLA concentration and the volume ratio of water phase to dichloromethane phase were investigated. The results showed that stable microspheres can be obtained under the conditions that the mass ratio of PLLA to PVA is 20:1. Porous microspheres were obtained under faster evaporating speed of dichloromethane. The microsphere size increased with increasing PLLA concentration. The microsphere size also increased with the increase of the volume ratio of water phase to dichloromethane phase.     

Photo‐controlled Hierarchical Assembly and Fusion of Coumarin‐containing Polydiacetylene Vesicles

Herein, we synthesize a coumarin‐substituted diacetylene monomer (CODA) and report the novel photo‐controlled reversible assembly and disassembly behavior of the polymerized CODA (PCODA) vesicles. The photo‐triggered dimerization and cleavage reactions of the coumarin groups within the surface of the adjacent PCODA vesicles can be utilized as the driving force to induce assembly and disassembly of PCODA vesicles. Moreover, the boundary of PCODA vesicles in the aggregates becomes more obscure when the irradiation time exceeds 30 min. Fusion occurs upon close docking of target membranes, driven by sufficient dimerization of the coumarin groups within the surface of PCODA vesicles.